Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
How to Install and Align a Universal Coupling in a Mechanical Assembly
Proper installation and alignment of a universal coupling are crucial for its efficient and reliable operation. Here are the steps to install and align a universal coupling in a mechanical assembly:
- Prepare the Coupling Components: Ensure that all the universal coupling components are clean and free from any dirt, debris, or damage. Verify that the shafts to be connected are appropriately sized and compatible with the coupling.
- Inspect the Coupling: Check the universal coupling’s spider or cross assembly for any signs of wear, cracks, or damage. Replace the spider if it shows any signs of deterioration.
- Align the Shafts: Position the two shafts that need to be connected to the universal coupling. Align the shafts as closely as possible, aiming for minimum misalignment. Ensure that the shafts are parallel and that the angular misalignment is within the coupling’s specified tolerance.
- Insert the Spider: Carefully insert the spider or cross assembly into the forks of the universal coupling. Make sure the spider is properly seated and fits securely in both forks.
- Secure the Coupling: Depending on the type of universal coupling, secure the forks onto the shafts using set screws, bolts, or clamps. Follow the manufacturer’s guidelines for the specific coupling model.
- Check for Free Movement: After securing the coupling, check that the spider allows for free movement of the shafts within the specified angular and axial limits. The shafts should rotate smoothly without any binding or interference.
- Perform a Trial Run: Before finalizing the installation, perform a trial run to ensure that the coupling operates smoothly and without any unusual vibrations or noises.
- Make Final Adjustments: If necessary, make minor adjustments to the alignment or coupling position to optimize the performance. Recheck the shaft alignment and ensure that it meets the required specifications.
- Tighten Fasteners: Once the alignment is satisfactory, tighten all the fasteners securely to prevent any movement or slippage during operation.
- Perform Regular Maintenance: Schedule regular inspections and maintenance for the universal coupling to ensure its continued performance and reliability. Lubricate the coupling as per the manufacturer’s recommendations to reduce wear and friction.
Remember that accurate alignment of the universal coupling will minimize stress on the shafts and extend the lifespan of the coupling and connected components. If you are unsure about the installation process or the coupling’s compatibility with your system, consult the manufacturer or a qualified engineer for guidance.
How do you calculate the required size and specifications for a half coupling?
Calculating the required size and specifications for a half coupling involves considering several factors to ensure a proper fit and secure connection. Here are the steps to calculate the required size and specifications:
1. Pipe Size: Determine the size of the pipe that the half coupling will connect to. Pipe sizes are typically specified in inches, and the half coupling size should match the pipe size.
2. Pipe Material: Identify the material of the pipe, such as stainless steel, PVC, carbon steel, brass, copper, etc. The half coupling material should be compatible with the pipe material to prevent corrosion and ensure a reliable connection.
3. Pressure Rating: Determine the maximum operating pressure of the system. The half coupling should have a pressure rating that meets or exceeds the system’s operating pressure to ensure safety and performance.
4. Temperature Rating: Consider the maximum and minimum operating temperatures of the system. The half coupling material and design should be suitable for the temperature range to prevent deformation or failure.
5. Alignment and Misalignment: Evaluate the alignment and potential misalignment between the pipes. Some half couplings are designed to accommodate angular, parallel, or axial misalignment, providing flexibility in installation.
6. End Connection: Determine the type of end connection required for the half coupling, such as threaded, weld-on, or flanged. The end connection should match the corresponding connection on the pipe.
7. Corrosion Resistance: Consider the environment in which the half coupling will be installed. For corrosive environments, select a half coupling material with suitable corrosion resistance.
8. Industry Standards: Ensure that the selected half coupling complies with relevant industry standards and certifications for quality and safety.
9. Manufacturer Guidelines: Follow the manufacturer’s guidelines and recommendations for selecting the appropriate half coupling size and specifications based on the application requirements.
It is essential to consult with coupling manufacturers, suppliers, or industry experts if you are unsure about the correct size and specifications for the half coupling. Proper sizing and selection will ensure a reliable and efficient connection in the piping system.
What are the Different Types of Universal Couplings Available in the Market?
Universal couplings, also known as universal joints or U-joints, come in various designs to meet the specific needs of different applications. The main types of universal couplings available in the market include:
- Single Universal Joint: This is the most common type of universal coupling and consists of two yokes connected by a cross-shaped intermediate component. It allows for angular misalignment between the two shafts.
- Double Universal Joint: Also known as a double Cardan joint, this type of coupling uses two single universal joints connected end-to-end with an intermediate shaft in between. It is used to minimize the angular variation between the input and output shafts, reducing vibration in certain applications.
- Constant Velocity Joint (CV Joint): A CV joint is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission even at varying angles.
- Disc Coupling: A disc coupling, also known as a diaphragm coupling, is a type of universal coupling that uses a series of flexible metal discs to transmit torque between the shafts. It provides high torsional stiffness and can accommodate misalignment in multiple directions.
- Flex Joint Coupling: The flex joint coupling is designed to handle large angular misalignments and axial movements. It is commonly used in applications with significant shaft misalignment and torsional flexibility requirements.
The choice of universal coupling type depends on factors such as the required range of motion, misalignment angles, torque capacity, and application-specific requirements. Engineers and designers select the appropriate coupling type based on the specific needs of the mechanical system to ensure reliable and efficient power transmission while accommodating shaft misalignment and angular variation.
editor by CX 2023-09-27
China supplier Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling universal coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
Can a Universal Coupling Be Used to Connect Shafts of Different Sizes or Types?
Yes, one of the key advantages of a universal coupling is its ability to connect shafts of different sizes or types. Universal couplings are designed to accommodate misalignment between shafts, including angular, parallel, and axial misalignment.
The design of the universal coupling allows it to transmit torque and rotation between two shafts that are not perfectly aligned. This feature is particularly beneficial in situations where precise alignment is challenging or not possible due to equipment design, manufacturing tolerances, or operating conditions.
The universal coupling consists of two jointed forks, each connected to one of the shafts. The forks are connected by a cross-shaped component called the spider or cross assembly. The spider allows for the transfer of torque while allowing the shafts to move independently of each other to a certain degree.
The ability to accommodate misalignment makes universal couplings suitable for various applications, including automotive steering systems, industrial machinery, pumps, and marine equipment. Whether the shafts have different sizes or types, the universal coupling provides a flexible connection that helps minimize stress on the shafts and other connected components.
How do you calculate the required size and specifications for a half coupling?
Calculating the required size and specifications for a half coupling involves considering several factors to ensure a proper fit and secure connection. Here are the steps to calculate the required size and specifications:
1. Pipe Size: Determine the size of the pipe that the half coupling will connect to. Pipe sizes are typically specified in inches, and the half coupling size should match the pipe size.
2. Pipe Material: Identify the material of the pipe, such as stainless steel, PVC, carbon steel, brass, copper, etc. The half coupling material should be compatible with the pipe material to prevent corrosion and ensure a reliable connection.
3. Pressure Rating: Determine the maximum operating pressure of the system. The half coupling should have a pressure rating that meets or exceeds the system’s operating pressure to ensure safety and performance.
4. Temperature Rating: Consider the maximum and minimum operating temperatures of the system. The half coupling material and design should be suitable for the temperature range to prevent deformation or failure.
5. Alignment and Misalignment: Evaluate the alignment and potential misalignment between the pipes. Some half couplings are designed to accommodate angular, parallel, or axial misalignment, providing flexibility in installation.
6. End Connection: Determine the type of end connection required for the half coupling, such as threaded, weld-on, or flanged. The end connection should match the corresponding connection on the pipe.
7. Corrosion Resistance: Consider the environment in which the half coupling will be installed. For corrosive environments, select a half coupling material with suitable corrosion resistance.
8. Industry Standards: Ensure that the selected half coupling complies with relevant industry standards and certifications for quality and safety.
9. Manufacturer Guidelines: Follow the manufacturer’s guidelines and recommendations for selecting the appropriate half coupling size and specifications based on the application requirements.
It is essential to consult with coupling manufacturers, suppliers, or industry experts if you are unsure about the correct size and specifications for the half coupling. Proper sizing and selection will ensure a reliable and efficient connection in the piping system.
How does a Universal Coupling Work to Transmit Torque and Rotation?
A universal coupling, also known as a universal joint or U-joint, is a mechanical device used to transmit torque and rotation between two shafts that are not in a straight line and have angular misalignment. It allows for flexible coupling between the shafts, enabling power transmission even when they are at different angles to each other.
The basic design of a single universal joint consists of two yokes, each attached to the end of the shafts to be connected. The yokes are connected by a cross-shaped intermediate component, often referred to as the spider or cross. The spider has four arms, each fitting into a yoke, creating a flexible joint.
When one shaft rotates, the spider transmits the motion to the other yoke and, consequently, to the second shaft. This mechanism allows the universal coupling to handle angular misalignment between the shafts. The universal joint can accommodate small angles of misalignment, making it ideal for applications where the shafts are not perfectly aligned.
The double universal joint, also known as the double Cardan joint, consists of two single universal joints connected end-to-end with an intermediate shaft in between. This design reduces the angular variation between the input and output shafts, providing a smoother rotation and reducing vibration in certain applications.
The constant velocity joint (CV joint) is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission, especially in front-wheel-drive vehicles, where the drive shafts must adjust to changing angles as the wheels turn.
Overall, universal couplings are essential components in various mechanical systems, especially in vehicles, industrial machinery, and power transmission applications. They allow for flexible power transmission while compensating for misalignment, making them a versatile and widely used coupling solution.
editor by CX 2023-09-18
China Custom Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc Curved Tooth Flex Rigid Drive Shaft Nm Yox Fluid Jaw Flexible Chain Gear Couplings universal coupling
Product Description
Excellent powder metallurgy parts metallic sintered parts
We could offer various powder metallurgy parts including iron based and copper based with top quality and cheapest price, please only send the drawing or sample to us, we will according to customer’s requirement to make it. if you are interested in our product, please do not hesitate to contact us, we would like to offer the top quality and best service for you. thank you!
How do We Work with Our Clients
1. For a design expert or a big company with your own engineering team: we prefer to receive a fully RFQ pack from you including drawing, 3D model, quantity, pictures;
2. For a start-up company owner or green hand for engineering: just send an idea that you want to try, you don’t even need to know what casting is;
3. Our sales will reply you within 24 hours to confirm further details and give the estimated quote time;
4. Our engineering team will evaluate your inquiry and provide our offer within next 1~3 working days.
5. We can arrange a technical communication meeting with you and our engineers together anytime if required.
| Place of origin: | Jangsu,China |
| Type: | Powder metallurgy sintering |
| Spare parts type: | Powder metallurgy parts |
| Machinery Test report: | Provided |
| Material: | Iron,stainless,steel,copper |
| Key selling points: | Quality assurance |
| Mould type: | Tungsten steel |
| Material standard: | MPIF 35,DIN 3571,JIS Z 2550 |
| Application: | Small home appliances,Lockset,Electric tool, automobile, |
| Brand Name: | OEM SERVICE |
| Plating: | Customized |
| After-sales Service: | Online support |
| Processing: | Powder Metallurgr,CNC Machining |
| Powder Metallurgr: | High frequency quenching, oil immersion |
| Quality Control: | 100% inspection |
The Advantage of Powder Metallurgy Process
1. Cost effective
The final products can be compacted with powder metallurgy method ,and no need or can shorten the processing of machine .It can save material greatly and reduce the production cost .
2. Complex shapes
Powder metallurgy allows to obtain complex shapes directly from the compacting tooling ,without any machining operation ,like teeth ,splines ,profiles ,frontal geometries etc.
3. High precision
Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered,improvable up to IT 5-7 after sizing .Additional machining operations can improve the precision .
4. Self-lubrication
The interconnected porosity of the material can be filled with oils ,obtaining then a self-lubricating bearing :the oil provides constant lubrication between bearing and shaft ,and the system does not need any additional external lubricant .
5. Green technology
The manufacturing process of sintered components is certified as ecological ,because the material waste is very low ,the product is recyclable ,and the energy efficiency is good because the material is not molten.
FAQ
Q1: What is the type of payment?
A: Usually you should prepay 50% of the total amount. The balance should be pay off before shipment.
Q2: How to guarantee the high quality?
A: 100% inspection. We have Carl Zeiss high-precision testing equipment and testing department to make sure every product of size,appearance and pressure test are good.
Q3: How long will you give me the reply?
A: we will contact you in 12 hours as soon as we can.
Q4. How about your delivery time?
A: Generally, it will take 25 to 35 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling/mould made.
Q5. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6: How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.
Q7: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
What are the Common Materials Used in Manufacturing Universal Couplings?
Universal couplings are commonly manufactured using a variety of materials, each chosen based on its mechanical properties, durability, and compatibility with the application. Some of the common materials used in manufacturing universal couplings include:
- Steel: Steel is one of the most widely used materials for universal couplings. It offers excellent strength, durability, and resistance to wear. Carbon steel and alloy steel are commonly used for general-purpose universal couplings.
- Stainless Steel: Stainless steel is chosen for its corrosion resistance and ability to withstand harsh environmental conditions. It is commonly used in applications where the coupling may be exposed to moisture, chemicals, or high temperatures.
- Aluminum: Aluminum is lightweight and has good corrosion resistance. It is often used in applications where weight reduction is essential, such as in the automotive and aerospace industries.
- Cast Iron: Cast iron is known for its high strength and wear resistance. It is commonly used for heavy-duty applications and situations where shock loads may be present.
- Bronze: Bronze is a material chosen for its self-lubricating properties. It is commonly used in applications where lubrication may be limited or difficult.
- Plastics: Some universal couplings use high-strength plastics, such as polyurethane or nylon, for specific applications where non-metallic materials are preferred due to factors like electrical insulation or chemical resistance.
The choice of material depends on factors such as the application’s operating conditions, load requirements, temperature range, and potential exposure to corrosive or abrasive substances. Manufacturers select the appropriate material to ensure that the universal coupling performs reliably and efficiently in its intended environment.
Can a Universal Coupling Reduce Vibration and Noise in Mechanical Systems?
Yes, a universal coupling can help reduce vibration and noise in mechanical systems, especially in applications where misalignment is a concern. Universal couplings are designed to accommodate angular misalignment between shafts, which can arise due to various factors such as manufacturing tolerances, thermal expansion, or dynamic forces.
When shaft misalignment occurs in a mechanical system, it can lead to vibration and noise during operation. This is because misaligned shafts cause uneven distribution of forces and result in increased stresses on bearings, shafts, and other connected components. The resulting vibration and noise can be detrimental to the performance, efficiency, and lifespan of the machinery.
By using a universal coupling, the coupling’s design allows it to compensate for angular misalignment and minimize the transmission of misalignment-induced vibrations to the connected equipment. The flexibility of the universal coupling allows it to handle moderate angular misalignments while transmitting torque smoothly between shafts. This reduces the stresses on the connected components and mitigates the vibration and noise levels.
However, it is important to note that while universal couplings can help reduce vibration and noise caused by angular misalignment, they may not address other sources of vibration and noise in the system. For example, if the vibration is primarily caused by unbalanced rotating parts, worn bearings, or other factors unrelated to misalignment, a universal coupling alone may not be sufficient to eliminate the issue.
Overall, when selecting a universal coupling for a specific application, it is essential to consider the level of misalignment it can handle, the type of vibration and noise issues present, and whether additional measures are required to address other sources of vibration and noise in the mechanical system.
What is a Universal Coupling and Where is it Used in Mechanical Systems?
A universal coupling, also known as a universal joint or U-joint, is a mechanical device used to connect two shafts that are not in a straight line and allow them to rotate at different angles to each other. It is a type of coupling that provides flexibility and compensates for misalignment between shafts, making it ideal for transmitting torque in applications where shafts are not perfectly aligned.
The universal coupling consists of two yoke-like shaft ends connected by a cross-shaped intermediate component. Each yoke end is attached to one of the shafts, and the cross-shaped component allows the two shafts to rotate independently while maintaining rotational power transmission.
The universal coupling is widely used in various mechanical systems and applications, including:
- Automotive Drivetrains: Universal couplings are commonly used in automotive drivetrains to transmit power from the engine to the wheels. They allow the driveshaft to accommodate changes in angle and distance between the engine, transmission, and wheels.
- Industrial Machinery: In industrial machinery, universal couplings are used to connect shafts in equipment such as pumps, compressors, gearboxes, and conveyors. They enable smooth power transmission even when the shafts are misaligned due to installation tolerances or operational conditions.
- Marine Applications: Universal couplings are used in marine propulsion systems to connect the engine to the propeller shaft. They can accommodate the movement of the ship’s hull and allow the propeller to rotate at different angles to the engine.
- Aerospace: Universal couplings are used in aerospace applications to transmit torque between non-aligned shafts, such as in aircraft control systems.
- Steering Mechanisms: Universal couplings are employed in steering systems of vehicles and machinery to transfer motion from the steering wheel to the steering linkage, allowing for changes in angles during turning.
Overall, universal couplings are essential components in many mechanical systems where misalignment and flexibility are a concern. They facilitate smooth power transmission, reduce vibration, and extend the life of the connected equipment by absorbing shocks and compensating for misalignment.
editor by CX 2023-09-07
China factory Flange Cast Iron Coupling Steel Universal Joint Cardan Pump Rubber Motor Disc Curved Tooth Flex Rigid Drive Shaft Nm Yox Fluid Jaw Flexible Chain Gear Couplings universal coupling
Product Description
Excellent powder metallurgy parts metallic sintered parts
We could offer various powder metallurgy parts including iron based and copper based with top quality and cheapest price, please only send the drawing or sample to us, we will according to customer’s requirement to make it. if you are interested in our product, please do not hesitate to contact us, we would like to offer the top quality and best service for you. thank you!
How do We Work with Our Clients
1. For a design expert or a big company with your own engineering team: we prefer to receive a fully RFQ pack from you including drawing, 3D model, quantity, pictures;
2. For a start-up company owner or green hand for engineering: just send an idea that you want to try, you don’t even need to know what casting is;
3. Our sales will reply you within 24 hours to confirm further details and give the estimated quote time;
4. Our engineering team will evaluate your inquiry and provide our offer within next 1~3 working days.
5. We can arrange a technical communication meeting with you and our engineers together anytime if required.
| Place of origin: | Jangsu,China |
| Type: | Powder metallurgy sintering |
| Spare parts type: | Powder metallurgy parts |
| Machinery Test report: | Provided |
| Material: | Iron,stainless,steel,copper |
| Key selling points: | Quality assurance |
| Mould type: | Tungsten steel |
| Material standard: | MPIF 35,DIN 3571,JIS Z 2550 |
| Application: | Small home appliances,Lockset,Electric tool, automobile, |
| Brand Name: | OEM SERVICE |
| Plating: | Customized |
| After-sales Service: | Online support |
| Processing: | Powder Metallurgr,CNC Machining |
| Powder Metallurgr: | High frequency quenching, oil immersion |
| Quality Control: | 100% inspection |
The Advantage of Powder Metallurgy Process
1. Cost effective
The final products can be compacted with powder metallurgy method ,and no need or can shorten the processing of machine .It can save material greatly and reduce the production cost .
2. Complex shapes
Powder metallurgy allows to obtain complex shapes directly from the compacting tooling ,without any machining operation ,like teeth ,splines ,profiles ,frontal geometries etc.
3. High precision
Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered,improvable up to IT 5-7 after sizing .Additional machining operations can improve the precision .
4. Self-lubrication
The interconnected porosity of the material can be filled with oils ,obtaining then a self-lubricating bearing :the oil provides constant lubrication between bearing and shaft ,and the system does not need any additional external lubricant .
5. Green technology
The manufacturing process of sintered components is certified as ecological ,because the material waste is very low ,the product is recyclable ,and the energy efficiency is good because the material is not molten.
FAQ
Q1: What is the type of payment?
A: Usually you should prepay 50% of the total amount. The balance should be pay off before shipment.
Q2: How to guarantee the high quality?
A: 100% inspection. We have Carl Zeiss high-precision testing equipment and testing department to make sure every product of size,appearance and pressure test are good.
Q3: How long will you give me the reply?
A: we will contact you in 12 hours as soon as we can.
Q4. How about your delivery time?
A: Generally, it will take 25 to 35 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. and if the item was non standard, we have to consider extra 10-15days for tooling/mould made.
Q5. Can you produce according to the samples or drawings?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6: How about tooling Charge?
A: Tooling charge only charge once when first order, all future orders would not charge again even tooling repair or under maintance.
Q7: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
What are the Common Materials Used in Manufacturing Universal Couplings?
Universal couplings are commonly manufactured using a variety of materials, each chosen based on its mechanical properties, durability, and compatibility with the application. Some of the common materials used in manufacturing universal couplings include:
- Steel: Steel is one of the most widely used materials for universal couplings. It offers excellent strength, durability, and resistance to wear. Carbon steel and alloy steel are commonly used for general-purpose universal couplings.
- Stainless Steel: Stainless steel is chosen for its corrosion resistance and ability to withstand harsh environmental conditions. It is commonly used in applications where the coupling may be exposed to moisture, chemicals, or high temperatures.
- Aluminum: Aluminum is lightweight and has good corrosion resistance. It is often used in applications where weight reduction is essential, such as in the automotive and aerospace industries.
- Cast Iron: Cast iron is known for its high strength and wear resistance. It is commonly used for heavy-duty applications and situations where shock loads may be present.
- Bronze: Bronze is a material chosen for its self-lubricating properties. It is commonly used in applications where lubrication may be limited or difficult.
- Plastics: Some universal couplings use high-strength plastics, such as polyurethane or nylon, for specific applications where non-metallic materials are preferred due to factors like electrical insulation or chemical resistance.
The choice of material depends on factors such as the application’s operating conditions, load requirements, temperature range, and potential exposure to corrosive or abrasive substances. Manufacturers select the appropriate material to ensure that the universal coupling performs reliably and efficiently in its intended environment.
How do you calculate the required size and specifications for a half coupling?
Calculating the required size and specifications for a half coupling involves considering several factors to ensure a proper fit and secure connection. Here are the steps to calculate the required size and specifications:
1. Pipe Size: Determine the size of the pipe that the half coupling will connect to. Pipe sizes are typically specified in inches, and the half coupling size should match the pipe size.
2. Pipe Material: Identify the material of the pipe, such as stainless steel, PVC, carbon steel, brass, copper, etc. The half coupling material should be compatible with the pipe material to prevent corrosion and ensure a reliable connection.
3. Pressure Rating: Determine the maximum operating pressure of the system. The half coupling should have a pressure rating that meets or exceeds the system’s operating pressure to ensure safety and performance.
4. Temperature Rating: Consider the maximum and minimum operating temperatures of the system. The half coupling material and design should be suitable for the temperature range to prevent deformation or failure.
5. Alignment and Misalignment: Evaluate the alignment and potential misalignment between the pipes. Some half couplings are designed to accommodate angular, parallel, or axial misalignment, providing flexibility in installation.
6. End Connection: Determine the type of end connection required for the half coupling, such as threaded, weld-on, or flanged. The end connection should match the corresponding connection on the pipe.
7. Corrosion Resistance: Consider the environment in which the half coupling will be installed. For corrosive environments, select a half coupling material with suitable corrosion resistance.
8. Industry Standards: Ensure that the selected half coupling complies with relevant industry standards and certifications for quality and safety.
9. Manufacturer Guidelines: Follow the manufacturer’s guidelines and recommendations for selecting the appropriate half coupling size and specifications based on the application requirements.
It is essential to consult with coupling manufacturers, suppliers, or industry experts if you are unsure about the correct size and specifications for the half coupling. Proper sizing and selection will ensure a reliable and efficient connection in the piping system.
Choosing the Right Universal Coupling for a Specific Application
When selecting a universal coupling for a particular application, several factors need to be considered to ensure optimal performance and reliability:
- Load and Torque Requirements: Determine the maximum load and torque that the coupling will experience during operation. Choose a universal joint that can handle these loads without exceeding its rated capacity.
- Speed: Consider the operating speed of the application as high-speed applications may require different coupling designs to ensure smooth power transmission.
- Shaft Sizes: Measure the diameters of the shafts that need to be connected. The universal coupling should have compatible shaft bores to ensure a proper fit.
- Angular Misalignment: Evaluate the angle between the shafts that the universal joint needs to accommodate. Choose a universal coupling with the appropriate angular misalignment capability to avoid excessive stress on the components.
- Environmental Conditions: Consider the environmental factors such as temperature, humidity, dust, and corrosive agents. Choose a coupling made from materials suitable for the specific conditions to ensure longevity and reliability.
- Space Limitations: Evaluate the available space for the coupling installation. Ensure that the chosen universal joint can fit within the constraints of the system.
- Serviceability: Consider the ease of maintenance and the availability of replacement parts if needed. Opt for a universal coupling that is easy to access and service when required.
- Application Type: Determine the specific application type, such as automotive, industrial machinery, marine, aerospace, etc. Different applications may require unique coupling designs and materials to meet their demands.
- Alignment Frequency: If the system experiences frequent misalignments, consider using constant velocity joints (CV joints) that maintain a constant speed ratio between input and output shafts even at different angles.
By carefully considering these factors and matching the specifications of the universal coupling to the specific application requirements, you can ensure reliable and efficient power transmission and minimize the risk of premature coupling failure.
editor by CX 2023-09-06
China factory Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling universal coupling
Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
Specific Safety Considerations when Using Universal Couplings
Universal couplings are essential components in many mechanical systems, and their proper use is critical for the safety of personnel and the integrity of the equipment. Here are some specific safety considerations when using universal couplings:
- Regular Inspections: Perform routine inspections of the universal coupling to check for signs of wear, damage, or misalignment. Any issues should be addressed promptly to prevent potential accidents.
- Proper Installation: Ensure that the universal coupling is installed correctly and securely. Follow the manufacturer’s guidelines and torque specifications for tightening bolts, set screws, or clamps.
- Shaft Locking Mechanisms: If the universal coupling uses set screws or clamps to secure the shafts, ensure that these locking mechanisms are adequately tightened and checked periodically to prevent shaft slippage during operation.
- Correct Coupling Selection: Choose the appropriate universal coupling based on the specific application’s torque, speed, and misalignment requirements. Using an undersized coupling can lead to premature failure and safety hazards.
- Misalignment Limits: Stay within the manufacturer’s specified misalignment limits for the universal coupling. Excessive misalignment can lead to increased stress on the coupling and connected components, potentially causing failure.
- Guarding and Enclosure: If the universal coupling is exposed or accessible to personnel, consider installing guarding or enclosures to prevent accidental contact and reduce the risk of injury.
- Training and Awareness: Ensure that personnel working with or around machinery equipped with universal couplings receive proper training and understand the potential hazards associated with these components.
- Maintenance and Lubrication: Follow a regular maintenance schedule and lubricate the universal coupling as recommended by the manufacturer. Proper lubrication reduces friction and wear, contributing to safe and reliable operation.
- Emergency Stop: Equip the machinery with an emergency stop system that allows operators to quickly shut down the equipment in case of an emergency or abnormal condition.
- Consult the Manufacturer: If there are any concerns or questions about the safety aspects of using a universal coupling in a specific application, consult the manufacturer or a qualified engineer for guidance.
By adhering to these safety considerations and implementing proper installation, maintenance, and operational practices, the use of universal couplings can be safer and more effective in power transmission applications.
How do you calculate the required size and specifications for a half coupling?
Calculating the required size and specifications for a half coupling involves considering several factors to ensure a proper fit and secure connection. Here are the steps to calculate the required size and specifications:
1. Pipe Size: Determine the size of the pipe that the half coupling will connect to. Pipe sizes are typically specified in inches, and the half coupling size should match the pipe size.
2. Pipe Material: Identify the material of the pipe, such as stainless steel, PVC, carbon steel, brass, copper, etc. The half coupling material should be compatible with the pipe material to prevent corrosion and ensure a reliable connection.
3. Pressure Rating: Determine the maximum operating pressure of the system. The half coupling should have a pressure rating that meets or exceeds the system’s operating pressure to ensure safety and performance.
4. Temperature Rating: Consider the maximum and minimum operating temperatures of the system. The half coupling material and design should be suitable for the temperature range to prevent deformation or failure.
5. Alignment and Misalignment: Evaluate the alignment and potential misalignment between the pipes. Some half couplings are designed to accommodate angular, parallel, or axial misalignment, providing flexibility in installation.
6. End Connection: Determine the type of end connection required for the half coupling, such as threaded, weld-on, or flanged. The end connection should match the corresponding connection on the pipe.
7. Corrosion Resistance: Consider the environment in which the half coupling will be installed. For corrosive environments, select a half coupling material with suitable corrosion resistance.
8. Industry Standards: Ensure that the selected half coupling complies with relevant industry standards and certifications for quality and safety.
9. Manufacturer Guidelines: Follow the manufacturer’s guidelines and recommendations for selecting the appropriate half coupling size and specifications based on the application requirements.
It is essential to consult with coupling manufacturers, suppliers, or industry experts if you are unsure about the correct size and specifications for the half coupling. Proper sizing and selection will ensure a reliable and efficient connection in the piping system.
What are the Different Types of Universal Couplings Available in the Market?
Universal couplings, also known as universal joints or U-joints, come in various designs to meet the specific needs of different applications. The main types of universal couplings available in the market include:
- Single Universal Joint: This is the most common type of universal coupling and consists of two yokes connected by a cross-shaped intermediate component. It allows for angular misalignment between the two shafts.
- Double Universal Joint: Also known as a double Cardan joint, this type of coupling uses two single universal joints connected end-to-end with an intermediate shaft in between. It is used to minimize the angular variation between the input and output shafts, reducing vibration in certain applications.
- Constant Velocity Joint (CV Joint): A CV joint is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission even at varying angles.
- Disc Coupling: A disc coupling, also known as a diaphragm coupling, is a type of universal coupling that uses a series of flexible metal discs to transmit torque between the shafts. It provides high torsional stiffness and can accommodate misalignment in multiple directions.
- Flex Joint Coupling: The flex joint coupling is designed to handle large angular misalignments and axial movements. It is commonly used in applications with significant shaft misalignment and torsional flexibility requirements.
The choice of universal coupling type depends on factors such as the required range of motion, misalignment angles, torque capacity, and application-specific requirements. Engineers and designers select the appropriate coupling type based on the specific needs of the mechanical system to ensure reliable and efficient power transmission while accommodating shaft misalignment and angular variation.
editor by CX 2023-08-18
China Standard Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling universal coupling
Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
How to Install and Align a Universal Coupling in a Mechanical Assembly
Proper installation and alignment of a universal coupling are crucial for its efficient and reliable operation. Here are the steps to install and align a universal coupling in a mechanical assembly:
- Prepare the Coupling Components: Ensure that all the universal coupling components are clean and free from any dirt, debris, or damage. Verify that the shafts to be connected are appropriately sized and compatible with the coupling.
- Inspect the Coupling: Check the universal coupling’s spider or cross assembly for any signs of wear, cracks, or damage. Replace the spider if it shows any signs of deterioration.
- Align the Shafts: Position the two shafts that need to be connected to the universal coupling. Align the shafts as closely as possible, aiming for minimum misalignment. Ensure that the shafts are parallel and that the angular misalignment is within the coupling’s specified tolerance.
- Insert the Spider: Carefully insert the spider or cross assembly into the forks of the universal coupling. Make sure the spider is properly seated and fits securely in both forks.
- Secure the Coupling: Depending on the type of universal coupling, secure the forks onto the shafts using set screws, bolts, or clamps. Follow the manufacturer’s guidelines for the specific coupling model.
- Check for Free Movement: After securing the coupling, check that the spider allows for free movement of the shafts within the specified angular and axial limits. The shafts should rotate smoothly without any binding or interference.
- Perform a Trial Run: Before finalizing the installation, perform a trial run to ensure that the coupling operates smoothly and without any unusual vibrations or noises.
- Make Final Adjustments: If necessary, make minor adjustments to the alignment or coupling position to optimize the performance. Recheck the shaft alignment and ensure that it meets the required specifications.
- Tighten Fasteners: Once the alignment is satisfactory, tighten all the fasteners securely to prevent any movement or slippage during operation.
- Perform Regular Maintenance: Schedule regular inspections and maintenance for the universal coupling to ensure its continued performance and reliability. Lubricate the coupling as per the manufacturer’s recommendations to reduce wear and friction.
Remember that accurate alignment of the universal coupling will minimize stress on the shafts and extend the lifespan of the coupling and connected components. If you are unsure about the installation process or the coupling’s compatibility with your system, consult the manufacturer or a qualified engineer for guidance.
How do Temperature and Environmental Conditions Affect Universal Coupling Performance?
Temperature and environmental conditions can have a significant impact on the performance of universal couplings in mechanical systems. The materials used in manufacturing the coupling and the operating conditions can influence its durability, flexibility, and overall functionality.
Temperature: Universal couplings are often made from materials such as steel, stainless steel, or aluminum, which have specific temperature ranges they can withstand. Extreme temperatures, whether hot or cold, can affect the mechanical properties of the coupling material. High temperatures may lead to thermal expansion, which can affect the coupling’s fit and alignment. On the other hand, extremely low temperatures can cause the material to become brittle, reducing its flexibility and impact resistance. It is crucial to choose a universal coupling that is suitable for the anticipated temperature range in the application to ensure reliable performance.
Environmental Conditions: Universal couplings used in harsh environments, such as those exposed to moisture, chemicals, dust, or abrasive particles, need to be made from corrosion-resistant and durable materials. Corrosion can degrade the coupling over time, leading to reduced performance and potential failure. Additionally, environmental contaminants can affect the smooth operation of the coupling and cause premature wear. Proper sealing and protective coatings can enhance the coupling’s resistance to environmental factors.
Dynamic Operating Conditions: Some applications may subject the universal coupling to dynamic loads, shocks, or high-speed rotations. In such cases, the coupling’s fatigue strength and torsional stiffness become critical factors. High dynamic loads and shock forces can lead to stress concentration and fatigue failure in the coupling if it is not appropriately designed for such conditions.
Alignment Maintenance: Temperature variations and environmental conditions can cause changes in the alignment of the connected shafts. It is essential to regularly inspect and maintain the alignment of the coupling to prevent excessive wear and ensure optimal performance.
Overall, selecting a universal coupling that is designed to withstand the specific temperature and environmental conditions of the application is crucial for ensuring its longevity and reliable performance in mechanical systems.
Can Universal Couplings Accommodate Misalignment in Shafts and Drives?
Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:
- Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
- Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.
By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.
editor by CX 2023-08-17
China Best Sales Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling universal coupling
Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
Are there Maintenance Requirements for Universal Couplings to Ensure Longevity?
Yes, like any mechanical component, universal couplings require regular maintenance to ensure longevity and optimal performance. Proper maintenance practices can help prevent premature wear, reduce the risk of failure, and extend the service life of the coupling. Here are some essential maintenance requirements for universal couplings:
- Lubrication: Universal couplings consist of moving parts, such as bearings and cross journals, which require proper lubrication. Regularly lubricating the coupling helps reduce friction, wear, and heat generation. The type and amount of lubrication needed depend on the coupling’s design and the manufacturer’s recommendations.
- Inspection: Regular visual inspections should be performed to check for signs of wear, damage, or misalignment. Look for any abnormal vibrations, noise, or leakage. If any issues are detected, they should be addressed promptly to prevent further damage.
- Torque Checks: It is essential to periodically check the torque of the coupling’s fasteners, such as bolts and nuts, to ensure they are properly tightened. Loose fasteners can lead to misalignment and coupling failure.
- Alignment: If the coupling is used in an application where misalignment is common, such as automotive drivetrains, it is crucial to check and adjust the alignment regularly. Proper alignment helps prevent excessive stress on the coupling and other connected components.
- Replacement of Worn Parts: Over time, certain parts of the universal coupling, such as bearings and seals, may wear out and need replacement. Following the manufacturer’s recommended service intervals and using genuine replacement parts is essential to maintain the coupling’s reliability.
It is essential to refer to the manufacturer’s maintenance guidelines and recommendations specific to the universal coupling model and application. Regular maintenance not only ensures the longevity of the coupling but also contributes to the overall efficiency and reliability of the machinery or system in which it is used.
How do Temperature and Environmental Conditions Affect Universal Coupling Performance?
Temperature and environmental conditions can have a significant impact on the performance of universal couplings in mechanical systems. The materials used in manufacturing the coupling and the operating conditions can influence its durability, flexibility, and overall functionality.
Temperature: Universal couplings are often made from materials such as steel, stainless steel, or aluminum, which have specific temperature ranges they can withstand. Extreme temperatures, whether hot or cold, can affect the mechanical properties of the coupling material. High temperatures may lead to thermal expansion, which can affect the coupling’s fit and alignment. On the other hand, extremely low temperatures can cause the material to become brittle, reducing its flexibility and impact resistance. It is crucial to choose a universal coupling that is suitable for the anticipated temperature range in the application to ensure reliable performance.
Environmental Conditions: Universal couplings used in harsh environments, such as those exposed to moisture, chemicals, dust, or abrasive particles, need to be made from corrosion-resistant and durable materials. Corrosion can degrade the coupling over time, leading to reduced performance and potential failure. Additionally, environmental contaminants can affect the smooth operation of the coupling and cause premature wear. Proper sealing and protective coatings can enhance the coupling’s resistance to environmental factors.
Dynamic Operating Conditions: Some applications may subject the universal coupling to dynamic loads, shocks, or high-speed rotations. In such cases, the coupling’s fatigue strength and torsional stiffness become critical factors. High dynamic loads and shock forces can lead to stress concentration and fatigue failure in the coupling if it is not appropriately designed for such conditions.
Alignment Maintenance: Temperature variations and environmental conditions can cause changes in the alignment of the connected shafts. It is essential to regularly inspect and maintain the alignment of the coupling to prevent excessive wear and ensure optimal performance.
Overall, selecting a universal coupling that is designed to withstand the specific temperature and environmental conditions of the application is crucial for ensuring its longevity and reliable performance in mechanical systems.
Can Universal Couplings Accommodate Misalignment in Shafts and Drives?
Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:
- Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
- Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.
By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.
editor by CX 2023-08-16
China Standard Flexible Flex Fluid Chain Jaw Flange Gear Rigid Spacer Pin HRC Mh Nm Universal Fenaflex Oldham Spline Clamp Tyre Grid Hydraulic Servo Motor Shaft Coupling universal coupling
Product Description
Flexible flex Fluid Chain Jaw flange Gear Rigid Spacer PIN HRC MH NM universal Fenaflex Oldham spline clamp tyre grid hydraulic servo motor shaft Coupling
Product Description
The function of Shaft coupling:
1. Shafts for connecting separately manufactured units such as motors and generators.
2. If any axis is misaligned.
3. Provides mechanical flexibility.
4. Absorb the transmission of impact load.
5. Prevent overload
We can provide the following couplings.
| Rigid coupling | Flange coupling | Oldham coupling |
| Sleeve or muff coupling | Gear coupling | Bellow coupling |
| Split muff coupling | Flexible coupling | Fluid coupling |
| Clamp or split-muff or compression coupling | Universal coupling | Variable speed coupling |
| Bushed pin-type coupling | Diaphragm coupling | Constant speed coupling |
Company Profile
We are an industrial company specializing in the production of couplings. It has 3 branches: steel casting, forging, and heat treatment. Main products: cross shaft universal coupling, drum gear coupling, non-metallic elastic element coupling, rigid coupling, etc.
The company mainly produces the industry standard JB3241-91 swap JB5513-91 swc. JB3242-93 swz series universal coupling with spider type. It can also design and produce various non-standard universal couplings, other couplings, and mechanical products for users according to special requirements. Currently, the products are mainly sold to major steel companies at home and abroad, the metallurgical steel rolling industry, and leading engine manufacturers, with an annual production capacity of more than 7000 sets.
The company’s quality policy is “quality for survival, variety for development.” In August 2000, the national quality system certification authority audited that its quality assurance system met the requirements of GB/T19002-1994 IDT ISO9002:1994 and obtained the quality system certification certificate with the registration number 0900B5711. It is the first enterprise in the coupling production industry in HangZhou City that passed the ISO9002 quality and constitution certification.
The company pursues the business purpose of “reliable quality, the supremacy of reputation, commitment to business and customer satisfaction” and welcomes customers at home and abroad to choose our products.
At the same time, the company has established long-term cooperative relations with many enterprises and warmly welcomes friends from all walks of life to visit, investigate and negotiate business!
How to use the coupling safely
The coupling is an intermediate connecting part of each motion mechanism, which directly impacts the regular operation of each motion mechanism. Therefore, attention must be paid to:
1. The coupling is not allowed to have more than the specified axis deflection and radial displacement so as not to affect its transmission performance.
2. The bolts of the LINS coupling shall not be loose or damaged.
3. Gear coupling and cross slide coupling shall be lubricated regularly, and lubricating grease shall be added every 2-3 months to avoid severe wear of gear teeth and serious consequences.
4. The tooth width contact length of gear coupling shall not be less than 70%; Its axial displacement shall not be more significant than 5mm
5. The coupling is not allowed to have cracks. If there are cracks, it needs to be replaced (they can be knocked with a small hammer and judged according to the sound).
6. The keys of LINS coupling shall be closely matched and shall not be loosened.
7. The tooth thickness of the gear coupling is worn. When the lifting mechanism exceeds 15% of the original tooth thickness, the operating mechanism exceeds 25%, and the broken tooth is also scrapped.
8. If the elastic ring of the pin coupling and the sealing ring of the gear coupling is damaged or aged, they should be replaced in time.
Certifications
Packaging & Shipping
Specific Safety Considerations when Using Universal Couplings
Universal couplings are essential components in many mechanical systems, and their proper use is critical for the safety of personnel and the integrity of the equipment. Here are some specific safety considerations when using universal couplings:
- Regular Inspections: Perform routine inspections of the universal coupling to check for signs of wear, damage, or misalignment. Any issues should be addressed promptly to prevent potential accidents.
- Proper Installation: Ensure that the universal coupling is installed correctly and securely. Follow the manufacturer’s guidelines and torque specifications for tightening bolts, set screws, or clamps.
- Shaft Locking Mechanisms: If the universal coupling uses set screws or clamps to secure the shafts, ensure that these locking mechanisms are adequately tightened and checked periodically to prevent shaft slippage during operation.
- Correct Coupling Selection: Choose the appropriate universal coupling based on the specific application’s torque, speed, and misalignment requirements. Using an undersized coupling can lead to premature failure and safety hazards.
- Misalignment Limits: Stay within the manufacturer’s specified misalignment limits for the universal coupling. Excessive misalignment can lead to increased stress on the coupling and connected components, potentially causing failure.
- Guarding and Enclosure: If the universal coupling is exposed or accessible to personnel, consider installing guarding or enclosures to prevent accidental contact and reduce the risk of injury.
- Training and Awareness: Ensure that personnel working with or around machinery equipped with universal couplings receive proper training and understand the potential hazards associated with these components.
- Maintenance and Lubrication: Follow a regular maintenance schedule and lubricate the universal coupling as recommended by the manufacturer. Proper lubrication reduces friction and wear, contributing to safe and reliable operation.
- Emergency Stop: Equip the machinery with an emergency stop system that allows operators to quickly shut down the equipment in case of an emergency or abnormal condition.
- Consult the Manufacturer: If there are any concerns or questions about the safety aspects of using a universal coupling in a specific application, consult the manufacturer or a qualified engineer for guidance.
By adhering to these safety considerations and implementing proper installation, maintenance, and operational practices, the use of universal couplings can be safer and more effective in power transmission applications.
What are some real-world examples of half coupling usage in different industries?
Half couplings are widely used in various industries to create secure connections between pipes and other components. Here are some real-world examples of half coupling usage:
1. Oil and Gas Industry: In the oil and gas industry, half couplings are used to connect pipes, valves, and fittings in pipelines, refineries, and offshore platforms. They facilitate easy installation and maintenance of piping systems, allowing for efficient flow of oil and gas.
2. Chemical Industry: Chemical processing plants use half couplings to connect pipes that transport different chemicals and substances. These couplings are often made from corrosion-resistant materials to withstand the harsh chemical environments.
3. Water Treatment Plants: Half couplings play a vital role in water treatment plants, connecting pipes that carry treated water, wastewater, and chemicals. They are essential for maintaining a reliable and leak-free water distribution system.
4. Power Generation: Power plants, including thermal, nuclear, and renewable energy facilities, utilize half couplings to connect pipes carrying steam, water, and cooling fluids. These couplings are designed to handle high temperatures and pressures.
5. Construction and Infrastructure: In construction projects, half couplings are used to join pipes for plumbing, HVAC systems, and fire protection. They are also used in infrastructure projects like bridges and tunnels.
6. Food and Beverage Industry: Food processing plants use half couplings to connect pipes carrying liquids and beverages. Stainless steel half couplings are commonly used to maintain hygiene and prevent contamination.
7. Marine and Shipbuilding: Half couplings are employed in marine applications for connecting pipes, pumps, and fittings on ships and offshore platforms. They are designed to withstand the corrosive nature of seawater.
8. Pulp and Paper Industry: Pulp and paper mills use half couplings in their processing lines to connect pipes carrying pulp, chemicals, and water. These couplings are designed to handle abrasive materials.
9. Mining and Minerals Processing: In mining operations, half couplings are used to connect pipes that transport minerals, slurry, and wastewater. They are designed for durability and resistance to abrasive materials.
10. Aerospace and Aviation: In aerospace applications, half couplings are used in fuel and hydraulic systems to ensure reliable fluid flow and connections.
These are just a few examples of the diverse applications of half couplings across different industries. Their versatility, ease of use, and ability to create leak-proof connections make them a preferred choice in many piping systems.
Choosing the Right Universal Coupling for a Specific Application
When selecting a universal coupling for a particular application, several factors need to be considered to ensure optimal performance and reliability:
- Load and Torque Requirements: Determine the maximum load and torque that the coupling will experience during operation. Choose a universal joint that can handle these loads without exceeding its rated capacity.
- Speed: Consider the operating speed of the application as high-speed applications may require different coupling designs to ensure smooth power transmission.
- Shaft Sizes: Measure the diameters of the shafts that need to be connected. The universal coupling should have compatible shaft bores to ensure a proper fit.
- Angular Misalignment: Evaluate the angle between the shafts that the universal joint needs to accommodate. Choose a universal coupling with the appropriate angular misalignment capability to avoid excessive stress on the components.
- Environmental Conditions: Consider the environmental factors such as temperature, humidity, dust, and corrosive agents. Choose a coupling made from materials suitable for the specific conditions to ensure longevity and reliability.
- Space Limitations: Evaluate the available space for the coupling installation. Ensure that the chosen universal joint can fit within the constraints of the system.
- Serviceability: Consider the ease of maintenance and the availability of replacement parts if needed. Opt for a universal coupling that is easy to access and service when required.
- Application Type: Determine the specific application type, such as automotive, industrial machinery, marine, aerospace, etc. Different applications may require unique coupling designs and materials to meet their demands.
- Alignment Frequency: If the system experiences frequent misalignments, consider using constant velocity joints (CV joints) that maintain a constant speed ratio between input and output shafts even at different angles.
By carefully considering these factors and matching the specifications of the universal coupling to the specific application requirements, you can ensure reliable and efficient power transmission and minimize the risk of premature coupling failure.
editor by CX 2023-08-07
China wholesaler CZPT Customized Yoxiiz Fluid Coupling, Fluid Coupling Oil, Centrifugal Fluid Coupling chain coupling
Product Description
Densen customized yoxiiz fluid coupling,fluid coupling oil,centrifugal fluid coupling
| Product Name | Fluid coupling,constant fluid coupling,fluid coupling yox |
| DN mm | 16~190mm |
| Rated Torque | 40~25000 N·m |
| Allowable speed | 4500~200 kN·m |
| Material | 45#steel |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
Product show
Company Information
Equipment
Application Case
Typical case of diaphragm coupling applied to variable frequency speed control equipment
JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant
According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.
It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.
Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.
Other Application Case
Spare parts
Packaging & Shipping
Contact us
| Standard Or Nonstandard: | Standard |
|---|---|
| Shaft Hole: | 4~55 |
| Torque: | 34~35000 |
| Bore Diameter: | 6~220 |
| Speed: | 19000~5500 |
| Structure: | Flexible |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What Is a Coupling?
A coupling is a device used to connect two shafts. It transmits power between them and allows for some misalignment or end movement. There are several types of couplings. The most common ones are gear couplings and planetary couplings. However, there are many others as well.
Transfer of energy
Energy coupling is a process by which two biological reactions are linked by sharing energy. The energy released during one reaction can be used to drive the second. It is a very useful mechanism that synchronizes two biological systems. All cells have two types of reactions, exergonic and endergonic, and they are connected through energy coupling.
This process is important for a number of reasons. The first is that it allows the exchange of electrons and their energy. In a single molecule, this energy transfer involves the exchange of two electrons of different energy and spin. This exchange occurs because of the overlap interaction of two MOs.
Secondly, it is possible to achieve quadratic coupling. This is a phenomenon that occurs in circular membrane resonators when the system is statically deflected. This phenomenon has been gaining a great deal of interest as a mechanism for stronger coupling. If this mechanism is employed in a physical system, energy can be transferred on a nanometer scale.
The magnetic field is another important factor that affects the exchange of energy between semiconductor QWs. A strong magnetic field controls the strength of the coupling and the energy order of the exciton. The magnetic field can also influence the direction of polariton-mediated energy transfer. This mechanism is very promising for controlling the routing of excitation in a semiconductor.
Functions
Couplings play a variety of functions, including transferring power, compensating for misalignment, and absorbing shock. These functions depend on the type of shaft being coupled. There are four basic types: angular, parallel, and symmetrical. In many cases, coupling is necessary to accommodate misalignment.
Couplings are mechanical devices that join two rotating pieces of equipment. They are used to transfer power and allow for a small degree of end-to-end misalignment. This allows them to be used in many different applications, such as the transmission from the gearbox to the differential in an automobile. In addition, couplings can be used to transfer power to spindles.
Types
There are two main types of couplings: rigid and flexible. Rigid couplings are designed to prevent relative motion between the two shafts and are suitable for applications where precise alignment is required. However, high stresses in the case of significant misalignment can cause early failure of the coupling. Flexible couplings, on the other hand, allow for misalignment and allow for torque transmission.
A software application may exhibit different types of coupling. The first type involves the use of data. This means that one module may use data from another module for its operation. A good example of data coupling is the inheritance of an object. In a software application, one module can use another module’s data and parameters.
Another type of coupling is a rigid sleeve coupling. This type of coupling has a pipe with a bore that is finished to a specified tolerance. The pipe contains two threaded holes for transmitting torque. The sleeve is secured by a gib head key. This type of coupling may be used in applications where a couple of shafts are close together.
Other types of coupling include common and external. Common coupling occurs when two modules share global data and communication protocols. This type of coupling can lead to uncontrollable error propagation and unforeseen side effects when changes are made to the system. External coupling, on the other hand, involves two modules sharing an external device interface or communication protocol. Both types of coupling involve a shared code structure and depend on the external modules or hardware.
Mechanical couplings are essential in power transmission. They connect rotating shafts and can either be rigid or flexible, depending on the accuracy required. These couplings are used in pumps, compressors, motors, and generators to transmit power and torque. In addition to transferring power, couplings can also prevent torque overload.
Applications
Different coupling styles are ideal for different applications, and they have different characteristics that influence the coupling’s reliability during operation. These characteristics include stiffness, misalignment capability, ease of installation and maintenance, inherent balance, and speed capability. Selecting the right coupling style for a particular application is essential to minimize performance problems and maximize utility.
It is important to know the requirements for the coupling you choose before you start shopping. A proper selection process takes into account several design criteria, including torque and rpm, acoustic signals, and environmental factors. Once you’ve identified these parameters, you can select the best coupling for the job.
A gear coupling provides a mechanical connection between two rotating shafts. These couplings use gear mesh to transmit torque and power between two shafts. They’re typically used on large industrial machines, but they can also be used in smaller motion control systems. In smaller systems, a zero-backlash coupling design is ideal.
Another type of coupling is the flange coupling. These are easy to manufacture. Their design is similar to a sleeve coupling. But unlike a sleeve coupling, a flange coupling features a keyway on one side and two threaded holes on the other. These couplings are used in medium-duty industrial applications.
Besides being useful for power transmission, couplings can also prevent machine vibration. If vibration occurs in a machine, it can cause it to deviate from its predetermined position, or damage the motor. Couplings, however, help prevent this by absorbing the vibration and shock and preventing damage to expensive parts.
Couplings are heavily used in the industrial machinery and electrical industries. They provide the necessary rotation mechanism required by machinery and other equipment. Coupling suppliers can help customers find the right coupling for a specific application.
Criteria for selecting a coupling
When selecting a coupling for a specific application, there are a number of different factors to consider. These factors vary greatly, as do operating conditions, so selecting the best coupling for your system can be challenging. Some of these factors include horsepower, torque, and speed. You also need to consider the size of the shafts and the geometry of the equipment. Space restrictions and maintenance and installation requirements should also be taken into account. Other considerations can be specific to your system, such as the need for reversing.
First, determine what size coupling you need. The coupling’s size should be able to handle the torque required by the application. In addition, determine the interface connection, such as straight or tapered keyed shafts. Some couplings also feature integral flange connections.
During the specification process, be sure to specify which materials the coupling will be made of. This is important because the material will dictate most of its performance characteristics. Most couplings are made of stainless steel or aluminum, but you can also find ones made of Delrin, titanium, or other engineering-grade materials.
One of the most important factors to consider when selecting a coupling is its torque capability. If the torque rating is not adequate, the coupling can be damaged or break easily. Torque is a major factor in coupling selection, but it is often underestimated. In order to ensure maximum coupling performance, you should also take into consideration the size of the shafts and hubs.
In some cases, a coupling will need lubrication throughout its lifecycle. It may need to be lubricated every six months or even once a year. But there are couplings available that require no lubrication at all. An RBI flexible coupling by CZPT is one such example. Using a coupling of this kind can immediately cut down your total cost of ownership.
editor by CX 2023-06-08
China best High Quality Rigid Connection Chain Coupling coupling episodes
Product Description
Product Description
| Item | Chain coupling |
| Material | Carbon steel,Brass,Stainless steel,etc |
| Tolerance | 0.01mm-0.02mm |
| Type number | 3012, 4012, 4014, 4016, 5014, 5016, 5018,6018, 6571, 6571, 8018, 8571, 1571, 12571 |
| Model | KC |
| Service | OEM,ODM,OBM |
Company Profile
In 2571, HangZhou CZPT Machinery Co.,ltd was established by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou city(ZHangZhoug province, China), all 3 Founders are engineers who have more than averaged 30 years of experience. Then becausethe requirements of business expansion, in 2014, it moved to the current Xihu (West Lake) Dis. Industrial Zone (HangZhou city, ZHangZhoug province, China).
Through our CZPT brand ND, CZPT Machinery delivers agricultural solutions to agriculture machinery manufacturer and distributors CZPT through a full line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, drive shafts,sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Products can be customized as request.
We, CZPT machinery established a complete quality management system and sales service network to provide clients with high-quality products and satisfactory service. Our products are sold in 40 provinces and municipalities in China and 36 countries and regions in the world, our main market is the European market.
Main Products
Packaging & Shipping
Certifications
FAQ
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time? What is your terms of payment?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization.
For standard products, the payment is: 30% T/T in advance,balance before shipment.
Q: What is the exact MOQ or price for your product?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.
Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
| Standard or Nonstandard: | Standard |
|---|---|
| Feature: | Anti-Static, Corrosion-Resistant |
| Application: | Agricultural Machinery |
| Material: | Stainless Steel |
| Shaft Hole: | 19-32 |
| Torque: | 70-80n.M |
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Types of Couplings
A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.
Mechanical
The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
Electrical
Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.
Flexible
When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
Beam
A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.
Pin & bush
The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
Mesh tooth
Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
editor by CX 2023-05-30