Product Description

Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling

Product Description

Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.

Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc

Coupling performance

1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CZPT requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.

How to select the appropriate coupling type

The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.

If you cannot determine the type, you can contact our professional engineer

Related products

 

Company Profile

 

Our Equipments

Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.

Machining equipments
Heat equipment

 

Our Factory
Application – Photos from our partner customers

Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p

 

Are there Maintenance Requirements for Universal Couplings to Ensure Longevity?

Yes, like any mechanical component, universal couplings require regular maintenance to ensure longevity and optimal performance. Proper maintenance practices can help prevent premature wear, reduce the risk of failure, and extend the service life of the coupling. Here are some essential maintenance requirements for universal couplings:

• Lubrication: Universal couplings consist of moving parts, such as bearings and cross journals, which require proper lubrication. Regularly lubricating the coupling helps reduce friction, wear, and heat generation. The type and amount of lubrication needed depend on the coupling’s design and the manufacturer’s recommendations.
• Inspection: Regular visual inspections should be performed to check for signs of wear, damage, or misalignment. Look for any abnormal vibrations, noise, or leakage. If any issues are detected, they should be addressed promptly to prevent further damage.
• Torque Checks: It is essential to periodically check the torque of the coupling’s fasteners, such as bolts and nuts, to ensure they are properly tightened. Loose fasteners can lead to misalignment and coupling failure.
• Alignment: If the coupling is used in an application where misalignment is common, such as automotive drivetrains, it is crucial to check and adjust the alignment regularly. Proper alignment helps prevent excessive stress on the coupling and other connected components.
• Replacement of Worn Parts: Over time, certain parts of the universal coupling, such as bearings and seals, may wear out and need replacement. Following the manufacturer’s recommended service intervals and using genuine replacement parts is essential to maintain the coupling’s reliability.

It is essential to refer to the manufacturer’s maintenance guidelines and recommendations specific to the universal coupling model and application. Regular maintenance not only ensures the longevity of the coupling but also contributes to the overall efficiency and reliability of the machinery or system in which it is used.

How do Temperature and Environmental Conditions Affect Universal Coupling Performance?

Temperature and environmental conditions can have a significant impact on the performance of universal couplings in mechanical systems. The materials used in manufacturing the coupling and the operating conditions can influence its durability, flexibility, and overall functionality.

Temperature: Universal couplings are often made from materials such as steel, stainless steel, or aluminum, which have specific temperature ranges they can withstand. Extreme temperatures, whether hot or cold, can affect the mechanical properties of the coupling material. High temperatures may lead to thermal expansion, which can affect the coupling’s fit and alignment. On the other hand, extremely low temperatures can cause the material to become brittle, reducing its flexibility and impact resistance. It is crucial to choose a universal coupling that is suitable for the anticipated temperature range in the application to ensure reliable performance.

Environmental Conditions: Universal couplings used in harsh environments, such as those exposed to moisture, chemicals, dust, or abrasive particles, need to be made from corrosion-resistant and durable materials. Corrosion can degrade the coupling over time, leading to reduced performance and potential failure. Additionally, environmental contaminants can affect the smooth operation of the coupling and cause premature wear. Proper sealing and protective coatings can enhance the coupling’s resistance to environmental factors.

Dynamic Operating Conditions: Some applications may subject the universal coupling to dynamic loads, shocks, or high-speed rotations. In such cases, the coupling’s fatigue strength and torsional stiffness become critical factors. High dynamic loads and shock forces can lead to stress concentration and fatigue failure in the coupling if it is not appropriately designed for such conditions.

Alignment Maintenance: Temperature variations and environmental conditions can cause changes in the alignment of the connected shafts. It is essential to regularly inspect and maintain the alignment of the coupling to prevent excessive wear and ensure optimal performance.

Overall, selecting a universal coupling that is designed to withstand the specific temperature and environmental conditions of the application is crucial for ensuring its longevity and reliable performance in mechanical systems.

Can Universal Couplings Accommodate Misalignment in Shafts and Drives?

Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:

• Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
• Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.

By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.

editor by CX 2023-08-16