We – EPG Team the bigge EPT Chain and agricultural gearbox factory in China with 5 various branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Oligomer Response Used Discharge Soften Gear Pump
Requirements
1,polymer melt equipment pump
two, in shape for big capability output
three, fit for extremely high or lower viscosity polymer
Massive movement rate polymer melt equipment pump for reactor as discharge pump
GM-LK series of polymer melt gear pump is designed with a large entrance , suitable for the high temperature and high viscosity polymer melt conveying reaction, such as resin, chemical fiber industry, generally installed on the lower part of the reaction kettle, used as discharge pump.This series of melt gear pump has good self-priming performance, can be used in the vacuum reaction condition, the polymer material conveying and pressurization.
This GM-LK series huge stream rate polymer soften equipment pump employed under the response kettle/reactor as a discharge pump, you can see the following images
Main application fields:
For Processing:
PET PBT
PA6 PA66 PA12
LDPE LLDPE HDPE HMWPE
PP EVA PB
PS HIPS ABS SAN
PC PEK
PMMA POM TPU
Other high viscosity Polymers
Pictures of the discharge pump for reaction kettles /reactor
The characteristic of this GM-LK collection polymer melt gear pump below the reaction kettle as discharge pump.
1)it can be used on high temperature (350ºC),high pressure(15MPa),high viscosity (forty,000Pas)working condition.
two)The pressure flow pulsation is very small, and even can achieve linear output flow,easy to control
3)Good self-priming performance, can be used in the entrance with the operation condition of vacuum (.05 ~ 0.09 MPa)
4)Precise structure, high precision, long service life
Technical data:
Viscosity: 500~40000Pas(500,000~forty,000,000cP)
Suction side pressure : Vacuum(-.05~-.09MPa)~10MPa
Discharge side pressure: 0~15MPa
Differential pressure: 15MPa
Temperature: ≤350ºC
Heating method: Fully heating medium Jacketed
HT medium pressure: ≤1.6MPa
Pump variety and parameter
| Type |
Volume (cc/r) |
Max roate velocity (r/min) |
Outlet pressure (MPa) |
Inlet pressure (MPa) |
Rate of flow m3/h | Temperature | ||
| Lower viscosity material 1-1000Pa·s |
Large viscosity materials 1000~8000Pa·s |
Extremely-higher viscosity substance >=8000Pa·s |
||||||
| GM-LK-a hundred | one hundred | a hundred | ≤35 | Vacuum~5. | ≤0.51 | ≤0.36 | ≤0.21 | ≤350ºC |
| GM-LK-a hundred and sixty | 160 | one hundred | ≤0.82 | ≤0.fifty seven | ≤0.34 | |||
| GM-LK-two hundred | two hundred | 100 | ≤1. | ≤0.7 | ≤0.four | |||
| GM-LK-250 | 250 | one hundred | ≤1.three | ≤0.9 | ≤0.five | |||
| GM-LK-355 | 315 | one hundred | ≤1.6 | ≤1.1 | ≤0.7 | |||
| GM-LK-five hundred | five hundred | a hundred | ≤2.six | ≤1.eight | ≤1.1 | |||
| GM-LK-750 | 750 | eighty | ≤3.one | ≤2.1 | ≤1.three | |||
| GM-LK-1250 | a thousand | 80 | ≤4.1 | ≤2.9 | ≤1.7 | |||
| GM-LK-2000 | 2500 | eighty | ≤10 | ≤7 | ≤4 | |||
| GM-LK-3150 | 3150 | eighty | ≤13 | ≤9 | ≤5 | |||
| GM-LK-4500 | 4500 | sixty | ≤14 | ≤10 | ≤6 | |||
| GM-LK-6300 | 6300 | 60 | ≤19 | ≤13 | ≤8 | |||
| GM-LK-8000 | 8000 | 60 | ≤24 | ≤17 | ≤10 | |||
| GM-LK-12000 | 12000 | 50 | ≤31 | ≤21 | ≤13 | |||
| GM-LK-25000 | 25000 | fifty | ≤64 | ≤45 | ≤27 | |||
| Remark:the melt equipment pump circulation is related with the operate velocity, content viscosity, force, So the product selection remember to ask for us. |
||||||||
Sealing structure
one)the melt dynamic seal and packing seal
two)Single/double side machanical seal
three)With cooling melt dynamic seal
4)High temperature resistant packing seal
Installation way: GM-LK series melt gear pump generaaly is installed under the reaction kettle, it is used as the material discharge pump, usually arranged horizontally.
Drive mode:motor + reducer + universal coupling
Commissioning
We provide the operation manual for customers to gudie to install the screen changer, and at the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
Right after-sales service
12 months with proper operation by user, all the spare parts shall be replaced free of charge under guarantee period, fee for transportation and packing will be borne by users.
The use of original tools manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the outlined substitution areas contained herein are not sponsored, accredited, or produced by the OEM.
