Product Description

ISO2531 DN600 PN16 ductile cast iron di wide range universal couplings for steel pipes
 

Product Description

Details:
Ductile Iron Universal Coupling According to ISO2531&EN545
Size Range: DN40-DN600
Pressure: PN10/16
Bolts and Nuts material:Carbon Steel
Coating: CHINAMFG Bonded Epoxy coating
Use: This kind of couplings can be used for ductile iron or PVC pipes.

FEATURES
For STEEL . DI , UPVC,PPR,CI AND AC pipes or almost any other rigid pipe material . In the form of wide range (up to 23mm) couplings , are designed to joint pipes of various outside diameters with the same of different nominal bore . The ability of universal coupling to joint dissimilar pipe materials is a bonus feature in both repair or permanent situation . 

Direction for use
The product is easy to install and easy to disassemble. Set the connector evenly in the joint position of 2 different pipes and then tighten the screws.Is a very flexible coupling system used to assemble almost all types of piping materials and to repair old piping systems.

Material Specifications:
 

Body	Ductile Iron GGG50/40
End Ring	Ductile Iron GGG50/40
Rubber Seal	Rubber
Bolt &Nut	Dacromet Coated Steel
Cap	Plastic

 

Please contact us for more detail , package,delivery time and shipment.

welcome your enquiry ,we will do our best to support.

 

 

Detailed Photos

 

 

Related Products

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Specific Safety Considerations when Using Universal Couplings

Universal couplings are essential components in many mechanical systems, and their proper use is critical for the safety of personnel and the integrity of the equipment. Here are some specific safety considerations when using universal couplings:

1. Regular Inspections: Perform routine inspections of the universal coupling to check for signs of wear, damage, or misalignment. Any issues should be addressed promptly to prevent potential accidents.
2. Proper Installation: Ensure that the universal coupling is installed correctly and securely. Follow the manufacturer’s guidelines and torque specifications for tightening bolts, set screws, or clamps.
3. Shaft Locking Mechanisms: If the universal coupling uses set screws or clamps to secure the shafts, ensure that these locking mechanisms are adequately tightened and checked periodically to prevent shaft slippage during operation.
4. Correct Coupling Selection: Choose the appropriate universal coupling based on the specific application’s torque, speed, and misalignment requirements. Using an undersized coupling can lead to premature failure and safety hazards.
5. Misalignment Limits: Stay within the manufacturer’s specified misalignment limits for the universal coupling. Excessive misalignment can lead to increased stress on the coupling and connected components, potentially causing failure.
6. Guarding and Enclosure: If the universal coupling is exposed or accessible to personnel, consider installing guarding or enclosures to prevent accidental contact and reduce the risk of injury.
7. Training and Awareness: Ensure that personnel working with or around machinery equipped with universal couplings receive proper training and understand the potential hazards associated with these components.
8. Maintenance and Lubrication: Follow a regular maintenance schedule and lubricate the universal coupling as recommended by the manufacturer. Proper lubrication reduces friction and wear, contributing to safe and reliable operation.
9. Emergency Stop: Equip the machinery with an emergency stop system that allows operators to quickly shut down the equipment in case of an emergency or abnormal condition.
10. Consult the Manufacturer: If there are any concerns or questions about the safety aspects of using a universal coupling in a specific application, consult the manufacturer or a qualified engineer for guidance.

By adhering to these safety considerations and implementing proper installation, maintenance, and operational practices, the use of universal couplings can be safer and more effective in power transmission applications.

Are there special half couplings designed for specific types of pipes (e.g., stainless steel, PVC)?

Yes, there are special half couplings designed to accommodate specific types of pipes, such as stainless steel and PVC. The selection of the half coupling material depends on the material of the pipe being used in the system. Here are some common types of half couplings designed for specific pipe materials:

1. Stainless Steel Half Couplings: These half couplings are specifically designed for use with stainless steel pipes. Stainless steel half couplings offer excellent corrosion resistance and durability, making them suitable for applications in industries where corrosion or chemical compatibility is a concern.

2. PVC Half Couplings: PVC half couplings are designed for use with PVC (polyvinyl chloride) pipes commonly used in plumbing and irrigation systems. These couplings provide a secure and leak-resistant connection for PVC pipes and are typically non-corrosive and lightweight.

3. Carbon Steel Half Couplings: Carbon steel half couplings are commonly used with carbon steel pipes in various industrial applications. They offer good strength and durability, making them suitable for high-pressure and high-temperature systems.

4. Brass Half Couplings: Brass half couplings are used with brass pipes in plumbing and other low-pressure applications. Brass provides good corrosion resistance and is often preferred for its aesthetic appearance.

5. Copper Half Couplings: Copper half couplings are designed for use with copper pipes, commonly used in plumbing and refrigeration systems. Copper offers excellent heat and electrical conductivity and is resistant to corrosion.

6. Ductile Iron Half Couplings: Ductile iron half couplings are used with ductile iron pipes, offering high strength and ductility. They are commonly used in water and wastewater applications.

7. Galvanized Half Couplings: Galvanized half couplings are coated with zinc to provide corrosion resistance. They are used with galvanized pipes in outdoor and exposed environments.

The choice of half coupling material should match the material of the pipe to ensure compatibility, prevent corrosion, and maintain the overall integrity of the system. It is essential to consult with coupling manufacturers or industry experts to select the appropriate half coupling material based on the specific application and pipe material used in the system.

Choosing the Right Universal Coupling for a Specific Application

When selecting a universal coupling for a particular application, several factors need to be considered to ensure optimal performance and reliability:

• Load and Torque Requirements: Determine the maximum load and torque that the coupling will experience during operation. Choose a universal joint that can handle these loads without exceeding its rated capacity.
• Speed: Consider the operating speed of the application as high-speed applications may require different coupling designs to ensure smooth power transmission.
• Shaft Sizes: Measure the diameters of the shafts that need to be connected. The universal coupling should have compatible shaft bores to ensure a proper fit.
• Angular Misalignment: Evaluate the angle between the shafts that the universal joint needs to accommodate. Choose a universal coupling with the appropriate angular misalignment capability to avoid excessive stress on the components.
• Environmental Conditions: Consider the environmental factors such as temperature, humidity, dust, and corrosive agents. Choose a coupling made from materials suitable for the specific conditions to ensure longevity and reliability.
• Space Limitations: Evaluate the available space for the coupling installation. Ensure that the chosen universal joint can fit within the constraints of the system.
• Serviceability: Consider the ease of maintenance and the availability of replacement parts if needed. Opt for a universal coupling that is easy to access and service when required.
• Application Type: Determine the specific application type, such as automotive, industrial machinery, marine, aerospace, etc. Different applications may require unique coupling designs and materials to meet their demands.
• Alignment Frequency: If the system experiences frequent misalignments, consider using constant velocity joints (CV joints) that maintain a constant speed ratio between input and output shafts even at different angles.

By carefully considering these factors and matching the specifications of the universal coupling to the specific application requirements, you can ensure reliable and efficient power transmission and minimize the risk of premature coupling failure.

editor by CX 2024-03-26