Product Description

ISO2531 DN600 PN16 ductile cast iron di wide range universal couplings for steel pipes
 

Product Description

Details:
Ductile Iron Universal Coupling According to ISO2531&EN545
Size Range: DN40-DN600
Pressure: PN10/16
Bolts and Nuts material:Carbon Steel
Coating: CHINAMFG Bonded Epoxy coating
Use: This kind of couplings can be used for ductile iron or PVC pipes.

FEATURES
For STEEL . DI , UPVC,PPR,CI AND AC pipes or almost any other rigid pipe material . In the form of wide range (up to 23mm) couplings , are designed to joint pipes of various outside diameters with the same of different nominal bore . The ability of universal coupling to joint dissimilar pipe materials is a bonus feature in both repair or permanent situation . 

Direction for use
The product is easy to install and easy to disassemble. Set the connector evenly in the joint position of 2 different pipes and then tighten the screws.Is a very flexible coupling system used to assemble almost all types of piping materials and to repair old piping systems.

Material Specifications:
 

Body	Ductile Iron GGG50/40
End Ring	Ductile Iron GGG50/40
Rubber Seal	Rubber
Bolt &Nut	Dacromet Coated Steel
Cap	Plastic

 

Please contact us for more detail , package,delivery time and shipment.

welcome your enquiry ,we will do our best to support.

 

 

Detailed Photos

 

 

Related Products

 

How to Install and Align a Universal Coupling in a Mechanical Assembly

Proper installation and alignment of a universal coupling are crucial for its efficient and reliable operation. Here are the steps to install and align a universal coupling in a mechanical assembly:

1. Prepare the Coupling Components: Ensure that all the universal coupling components are clean and free from any dirt, debris, or damage. Verify that the shafts to be connected are appropriately sized and compatible with the coupling.
2. Inspect the Coupling: Check the universal coupling’s spider or cross assembly for any signs of wear, cracks, or damage. Replace the spider if it shows any signs of deterioration.
3. Align the Shafts: Position the two shafts that need to be connected to the universal coupling. Align the shafts as closely as possible, aiming for minimum misalignment. Ensure that the shafts are parallel and that the angular misalignment is within the coupling’s specified tolerance.
4. Insert the Spider: Carefully insert the spider or cross assembly into the forks of the universal coupling. Make sure the spider is properly seated and fits securely in both forks.
5. Secure the Coupling: Depending on the type of universal coupling, secure the forks onto the shafts using set screws, bolts, or clamps. Follow the manufacturer’s guidelines for the specific coupling model.
6. Check for Free Movement: After securing the coupling, check that the spider allows for free movement of the shafts within the specified angular and axial limits. The shafts should rotate smoothly without any binding or interference.
7. Perform a Trial Run: Before finalizing the installation, perform a trial run to ensure that the coupling operates smoothly and without any unusual vibrations or noises.
8. Make Final Adjustments: If necessary, make minor adjustments to the alignment or coupling position to optimize the performance. Recheck the shaft alignment and ensure that it meets the required specifications.
9. Tighten Fasteners: Once the alignment is satisfactory, tighten all the fasteners securely to prevent any movement or slippage during operation.
10. Perform Regular Maintenance: Schedule regular inspections and maintenance for the universal coupling to ensure its continued performance and reliability. Lubricate the coupling as per the manufacturer’s recommendations to reduce wear and friction.

Remember that accurate alignment of the universal coupling will minimize stress on the shafts and extend the lifespan of the coupling and connected components. If you are unsure about the installation process or the coupling’s compatibility with your system, consult the manufacturer or a qualified engineer for guidance.

How do you calculate the required size and specifications for a half coupling?

Calculating the required size and specifications for a half coupling involves considering several factors to ensure a proper fit and secure connection. Here are the steps to calculate the required size and specifications:

1. Pipe Size: Determine the size of the pipe that the half coupling will connect to. Pipe sizes are typically specified in inches, and the half coupling size should match the pipe size.

2. Pipe Material: Identify the material of the pipe, such as stainless steel, PVC, carbon steel, brass, copper, etc. The half coupling material should be compatible with the pipe material to prevent corrosion and ensure a reliable connection.

3. Pressure Rating: Determine the maximum operating pressure of the system. The half coupling should have a pressure rating that meets or exceeds the system’s operating pressure to ensure safety and performance.

4. Temperature Rating: Consider the maximum and minimum operating temperatures of the system. The half coupling material and design should be suitable for the temperature range to prevent deformation or failure.

5. Alignment and Misalignment: Evaluate the alignment and potential misalignment between the pipes. Some half couplings are designed to accommodate angular, parallel, or axial misalignment, providing flexibility in installation.

6. End Connection: Determine the type of end connection required for the half coupling, such as threaded, weld-on, or flanged. The end connection should match the corresponding connection on the pipe.

7. Corrosion Resistance: Consider the environment in which the half coupling will be installed. For corrosive environments, select a half coupling material with suitable corrosion resistance.

8. Industry Standards: Ensure that the selected half coupling complies with relevant industry standards and certifications for quality and safety.

9. Manufacturer Guidelines: Follow the manufacturer’s guidelines and recommendations for selecting the appropriate half coupling size and specifications based on the application requirements.

It is essential to consult with coupling manufacturers, suppliers, or industry experts if you are unsure about the correct size and specifications for the half coupling. Proper sizing and selection will ensure a reliable and efficient connection in the piping system.

Can Universal Couplings Accommodate Misalignment in Shafts and Drives?

Yes, universal couplings are specifically designed to accommodate misalignment between shafts and drives. The unique design of universal couplings allows them to transmit torque and rotation between two shafts that are not in perfect alignment with each other. There are two primary types of misalignment that universal couplings can handle:

• Angular Misalignment: Universal couplings can handle angular misalignment, which occurs when the shafts are not in line with each other and form an angle. The design of the universal joint allows it to bend and flex at different angles, allowing the shafts to stay connected and transmit torque even when they are not perfectly aligned.
• Parallel Misalignment: Universal couplings can also handle parallel misalignment, which occurs when the two shafts are not perfectly parallel to each other. The flexible nature of the universal joint allows it to compensate for small variations in parallel alignment, ensuring that the shafts remain connected and transmit power efficiently.

By accommodating misalignment, universal couplings help to reduce stress on the shafts and other connected components, thus preventing premature wear and failure. They are commonly used in various applications, including automotive drivetrains, industrial machinery, marine propulsion systems, and aerospace equipment, where misalignment is inevitable due to the dynamic nature of the systems.

editor by CX 2023-09-21