Product Description
Stainless Steel Coupling Gear Rigid Roller Chain Fluid Tyre Grid Jaw Spider HRC Nm Motor Flange Gear Pump Rubber Spline Shaft Flexible Universal Joint Coupling
Product Description
Main products
Coupling refers to a device that connects 2 shafts or shafts and rotating parts, rotates together during the transmission of motion and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load, which plays the role of overload protection.
Couplings can be divided into rigid couplings and flexible couplings.
Rigid couplings do not have buffering property and the ability to compensate the relative displacement of 2 axes. It is required that the 2 axes be strictly aligned. However, such couplings are simple in structure, low in manufacturing cost, convenient in assembly and disassembly, and maintenance, which can ensure that the 2 axes are relatively neutral, have large transmission torque, and are widely used. Commonly used are flange coupling, sleeve coupling and jacket coupling.
Flexible coupling can also be divided into flexible coupling without elastic element and flexible coupling with elastic element. The former type only has the ability to compensate the relative displacement of 2 axes, but cannot cushion and reduce vibration. Common types include slider coupling, gear coupling, universal coupling and chain coupling; The latter type contains elastic elements. In addition to the ability to compensate the relative displacement of 2 axes, it also has the functions of buffering and vibration reduction. However, due to the strength of elastic elements, the transmitted torque is generally inferior to that of flexible couplings without elastic elements. Common types include elastic sleeve pin couplings, elastic pin couplings, quincunx couplings, tire type couplings, serpentine spring couplings, spring couplings, etc
Coupling performance
1) Mobility. The movability of the coupling refers to the ability to compensate the relative displacement of 2 rotating components. Factors such as manufacturing and installation errors between connected components, temperature changes during operation and deformation under load all put CHINAMFG requirements for mobility. The movable performance compensates or alleviates the additional load between shafts, bearings, couplings and other components caused by the relative displacement between rotating components.
(2) Buffering. For the occasions where the load is often started or the working load changes, the coupling shall be equipped with elastic elements that play the role of cushioning and vibration reduction to protect the prime mover and the working machine from little or no damage.
(3) Safe, reliable, with sufficient strength and service life.
(4) Simple structure, easy to assemble, disassemble and maintain.
How to select the appropriate coupling type
The following items should be considered when selecting the coupling type.
1. The size and nature of the required transmission torque, the requirements for buffering and damping functions, and whether resonance may occur.
2. The relative displacement of the axes of the 2 shafts is caused by manufacturing and assembly errors, shaft load and thermal expansion deformation, and relative movement between components.
3. Permissible overall dimensions and installation methods, and necessary operating space for assembly, adjustment and maintenance. For large couplings, they should be able to be disassembled without axial movement of the shaft.
In addition, the working environment, service life, lubrication, sealing, economy and other conditions should also be considered, and a suitable coupling type should be selected by referring to the characteristics of various couplings.
If you cannot determine the type, you can contact our professional engineer
Related products
Company Profile
Our Equipments
Main production equipment:
Large lathe, surface grinder, milling machine, gear shaper, spline milling machine, horizontal broaching machine, gear hobbing machine, shaper, slotting machine, bench drilling machine, radial drilling machine, boring machine, band sawing machine, horizontal lathe, end milling machine, crankshaft grinder, CNC milling machine, casting equipment, etc.
Inspection equipment:
Dynamic balance tester, high-speed intelligent carbon and sulfur analyzer, Blochon optical hardness tester, Leeb hardness tester, magnetic yoke flaw detector, special detection, modular fixture (self-made), etc.
Machining equipments
Heat equipment
Our Factory
Application – Photos from our partner customers
Company Profile
Our leading products are mechanical transmission basic parts – couplings, mainly including universal couplings, drum gear couplings, elastic couplings and other 3 categories of more than 30 series of varieties. It is widely used in metallurgical steel rolling, wind power, hydropower, mining, engineering machinery, petrochemical, lifting, paper making, rubber, rail transit, shipbuilding and marine engineering and other industries.
Our factory takes the basic parts of national standards as the benchmark, has more than 40 years of coupling production experience, takes “scientific management, pioneering and innovation, ensuring quality and customer satisfaction” as the quality policy, and aims to continuously provide users with satisfactory products and services. The production is guided by reasonable process, and the ISO9001:2015 quality management system standard is strictly implemented. We adhere to the principle of continuous improvement and innovation of coupling products. In recent years, it has successfully developed 10 national patent products such as SWF cross shaft universal coupling, among which the double cross shaft universal joint has won the national invention patent, SWF cross shaft universal coupling has won the new product award of China’s general mechanical parts coupling industry and the ZHangZhoug Province new product science and technology project.
Our factory has strong technical force, excellent process equipment, complete professional production equipment, perfect detection means, excellent after-sales service, various products and complete specifications. At the same time, we can provide the design and manufacturing of special non-standard products according to the needs of users. Our products sell well at home and abroad, and are trusted by the majority of users. We sincerely welcome friends from all walks of life at home and abroad to visit and negotiate for common development.p
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Signs of Wear or Failure in a Universal Coupling
Universal couplings are critical components in power transmission systems, and detecting signs of wear or impending failure is crucial to prevent equipment damage and ensure safe operation. Here are some common signs to look out for:
- Abnormal Noise: Unusual noises, such as clicking, grinding, or squeaking, during equipment operation can indicate misalignment, wear, or damaged universal coupling components.
- Vibration: Excessive vibration in the machinery may suggest misalignment or imbalance in the universal coupling or connected components.
- Visible Wear: Inspect the universal coupling visually for signs of wear, such as deformation, cracks, or visible damage to the coupling elements or shaft connections.
- Looseness: Check for any looseness in the universal coupling, shaft connections, or locking mechanisms. Loose components can lead to misalignment and accelerated wear.
- Shaft Movement: If there is axial or radial movement in the shafts during operation, it may indicate worn or damaged universal coupling components.
- Increased Operating Temperature: A rise in operating temperature beyond normal levels could be a result of friction and misalignment in the universal coupling.
- Reduced Performance: If the equipment’s performance declines, such as reduced power transmission efficiency or speed fluctuations, it may be a sign of coupling wear or failure.
- Grease Leakage: In grease-lubricated universal couplings, excessive grease leakage around the coupling seals can be an indication of seal damage or wear.
- Frequent Maintenance Issues: If the machinery equipped with a universal coupling requires frequent maintenance or repairs, it may be due to coupling issues that need attention.
- Age and Service Life: Consider the age of the universal coupling and its service life. Over time, couplings experience wear and fatigue, and older couplings may require closer inspection.
If any of these signs are observed, it is essential to take immediate action. Discontinue equipment operation, inspect the universal coupling thoroughly, and consult a qualified professional to determine the cause and plan necessary repairs or replacement. Regular maintenance and inspection can help detect potential issues early, ensuring the safe and efficient operation of the mechanical system.
What are some real-world examples of half coupling usage in different industries?
Half couplings are widely used in various industries to create secure connections between pipes and other components. Here are some real-world examples of half coupling usage:
1. Oil and Gas Industry: In the oil and gas industry, half couplings are used to connect pipes, valves, and fittings in pipelines, refineries, and offshore platforms. They facilitate easy installation and maintenance of piping systems, allowing for efficient flow of oil and gas.
2. Chemical Industry: Chemical processing plants use half couplings to connect pipes that transport different chemicals and substances. These couplings are often made from corrosion-resistant materials to withstand the harsh chemical environments.
3. Water Treatment Plants: Half couplings play a vital role in water treatment plants, connecting pipes that carry treated water, wastewater, and chemicals. They are essential for maintaining a reliable and leak-free water distribution system.
4. Power Generation: Power plants, including thermal, nuclear, and renewable energy facilities, utilize half couplings to connect pipes carrying steam, water, and cooling fluids. These couplings are designed to handle high temperatures and pressures.
5. Construction and Infrastructure: In construction projects, half couplings are used to join pipes for plumbing, HVAC systems, and fire protection. They are also used in infrastructure projects like bridges and tunnels.
6. Food and Beverage Industry: Food processing plants use half couplings to connect pipes carrying liquids and beverages. Stainless steel half couplings are commonly used to maintain hygiene and prevent contamination.
7. Marine and Shipbuilding: Half couplings are employed in marine applications for connecting pipes, pumps, and fittings on ships and offshore platforms. They are designed to withstand the corrosive nature of seawater.
8. Pulp and Paper Industry: Pulp and paper mills use half couplings in their processing lines to connect pipes carrying pulp, chemicals, and water. These couplings are designed to handle abrasive materials.
9. Mining and Minerals Processing: In mining operations, half couplings are used to connect pipes that transport minerals, slurry, and wastewater. They are designed for durability and resistance to abrasive materials.
10. Aerospace and Aviation: In aerospace applications, half couplings are used in fuel and hydraulic systems to ensure reliable fluid flow and connections.
These are just a few examples of the diverse applications of half couplings across different industries. Their versatility, ease of use, and ability to create leak-proof connections make them a preferred choice in many piping systems.
How does a Universal Coupling Work to Transmit Torque and Rotation?
A universal coupling, also known as a universal joint or U-joint, is a mechanical device used to transmit torque and rotation between two shafts that are not in a straight line and have angular misalignment. It allows for flexible coupling between the shafts, enabling power transmission even when they are at different angles to each other.
The basic design of a single universal joint consists of two yokes, each attached to the end of the shafts to be connected. The yokes are connected by a cross-shaped intermediate component, often referred to as the spider or cross. The spider has four arms, each fitting into a yoke, creating a flexible joint.
When one shaft rotates, the spider transmits the motion to the other yoke and, consequently, to the second shaft. This mechanism allows the universal coupling to handle angular misalignment between the shafts. The universal joint can accommodate small angles of misalignment, making it ideal for applications where the shafts are not perfectly aligned.
The double universal joint, also known as the double Cardan joint, consists of two single universal joints connected end-to-end with an intermediate shaft in between. This design reduces the angular variation between the input and output shafts, providing a smoother rotation and reducing vibration in certain applications.
The constant velocity joint (CV joint) is a specialized type of universal joint that maintains a constant velocity ratio between the input and output shafts. It is commonly used in automotive drive shafts to provide smooth power transmission, especially in front-wheel-drive vehicles, where the drive shafts must adjust to changing angles as the wheels turn.
Overall, universal couplings are essential components in various mechanical systems, especially in vehicles, industrial machinery, and power transmission applications. They allow for flexible power transmission while compensating for misalignment, making them a versatile and widely used coupling solution.
editor by CX 2024-05-03